Polished Thin Aluminium Sheet Alloy 1100 1050 1060 3003 5052 Sheets
For Building Industry
Product Description
Aluminum Sheet/Plate has an excellent strength to weight ratio and
a high resistance to corrosion. These
unique characteristics along with its electrical and thermal
conductivity make it the best choice for many
industrial applications. A wide selection of both Common and Heat
Treated Alloys are available from stock to
service the following industries.
Aerospace - 2024,2124,6061,7050,7075,7475
Air Separation - 5083,6061
LNG Heat Exchangers- 5083
Marine/Ship building - 5086,5083,6061
Construction - 3003,6061,Aluminum Tread plate
Tool & Die - 7075,Aluminum Cast Tooling Plate
General Machining - 6061, 7075
| Product name | 5052 h32 sheet |
| Type | Aluminum sheet/Aluminum plate |
| Standard | ATSTM B209, JIS H4000-2006,GB/T3190-2008,GB/T3880-2006 |
| Alloy | 1000 Series-8000 Series |
| Specifications | Thickness | 0.005-200mm or as your required |
| Width | 6-2600mm or as your required |
| Length | 100-100000mm or as your required |
| Surface | Bright, polished, hair line, brush, sand blast, checkered,
embossed, etching |
| Temper | H12,H14,H16,H24,H26,H32,O,H112,T3,T6,T4,T651,ect. |
5052 Aluminum Sheet/Plate:
Alloy 5052 aluminum sheet and coil are highly resistant to
corrosion. It is an alloy that contains 0.25 percent
chromium and 2.5 percent magnesium. It’s widely used because of its
formability and durability. It has high
fatigue and medium static strength. It can be used in marine
environments without worry of corrosion. This
metal also has excellent thermal conductivity and low density,
which is commonly found with other aluminum
alloys. Its fatigue properties and endurance limit are excellent.
Applications of 5052 Aluminum Sheet:
Because of high plasticity and weld-ability, aluminum alloy plate
5052 are commonly used in:
transport vehicles, ship parts.
instrument, lamp stent and rivet.
metal products, electrical enclosure.
aircraft fuel tank, oil pipe, aerospace.
Typical Mechanical Properties:
| Temper | Tensile Strength | Yield Strength | Elongation |
| MPa | MPa | % |
| O (annealed) | ≤195 | ≤90 | 25 |
| H32 | ≤230 | ≤195 | 12 |
| H34 | ≤260 | ≤215 | 10 |
| H36 | ≤275 | ≤240 | 8 |
| H38 | ≤290 | ≤255 | 7 |
Chemical Composition Limits (WT%):
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Others |
| each | total |
| 5052 | 0.25 | 0.4 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | 0.10 | 0.05 | 0.15 |
