Aluminium Alloy Wafer 1050 O For Cookware Aluminium Circle 0.3mm
0.6mm 1mm
Product Features of cookware Aluminium circle:
a. Wide range of selection on circles' size including customized
shape and size;
b. Excellent deep drawing and spinning quality;
c. RoHS and REACH compliance.
Manufacturing of cookware Aluminium circle:
Decoiler → Accumulator→Tension Leveller →Acid&Alkali Cleaner →
Rinse → Conversion Treatment →
Priming coater →Infrared Curing Oven →Main coater → Floatation
Curing Oven →Strippable Film Applicator
→ Exit Accumulator →Recoiler
Application of cookware Aluminium circle:
aluminium circle for pot making,
aluminium disk for pot,
aluminium circle,
pot circle,
cooking utensils,
cooker, pan,pot,boiler,
cookware making
road sign and traffic sign, and signal plate
| Chemical Composition (WT.%) |
| Alloy | Min.AL | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca |
| 1050 | 99.5 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | --- | --- | 0.05 | --- |
| 1060 | 99.6 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | --- | --- | 0.05 | --- |
| 1070 | 99.7 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | -- | --- | 0.04 | --- |
| 1100 | 99 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | --- | -- | --- | 0.1 | --- |
| Mechanical Properties |
| TEMPER | THICKNESS(mm) | TENSILE STRENGTH | ELONGATION% |
| HO | 0.55-5.50 | 60-100 | ≥ 20 |
| H12 | 0.55-5.50 | 70-120 | ≥ 4 |
| H14 | 0.55-5.50 | 85-120 | ≥ 2 |
Parameters:
| Division | Description | Application | Feature |
| 1000 SERIES | 1050 1060 1070 1090 1100 1235representative series aluminum plate
is also known as pure aluminum, in the series in 1000series belongs
to all the alumina quantity of a maximum number of series. Purity
can achieve 99.00% above. | Utensil, decoration, Reflecting plate, printing plate, heatproof
plate,cookware | Easy to process and weld,resistant to rust,high,conductibility of
electricity and heat,low strength |
| 3000 SERIES | 3000 series aluminum represents 3003 3004,3005, 3 A21 primarily.
And can be called in the 3xxx series aluminum antirust aluminum
production process more outstanding. The 3000series aluminum plate
is by manganese as the main component. Content at 1.0-1.5 between.
Is a rust-proof function better series. Conventional application in
the air conditioning, the refrigerator, such as car in damp
environment | Utensil(F/P, inside of rice cooker), aluminum can,material for
interior and exterior of building,chemical equipment,Cellular Phone | 20% higher strength than the 1100 series, easily welded and brazed,
good antirust,ability Non-heat treatable |
| 5000 SERIES | 5000series representatives 5052 5005 5083,5754. The 5000 series
aluminum alloy aluminum belong to the more commonly used series,
the main elements for magnesium, with magnesium in the amount
between 3-5%. And can be called aluminum magnesium alloy. Key
features for low density, high tensile strength, elongation rate is
high. In the same area under the weight of the magnesium alloy
aluminum less than other series. | Ship board heatproof apparatus, material for interior and exterior
of building, Parts of Electronic tools.Automobile Components | Excellent corrosion resistance andweld ability together with Easy
to process and
weld and superior hardness &heatproof
Can be anodized for increased corrosion resistance |
| 6000 SERIES | 6000series represents 6061 mainly contain magnesium and silicon of
two elements, so focused on the 4000 series and the advantages of
the 5000 series 6061 is a cold treatment aluminum forging products,
apply to fight against corrosion, oxidizing demanding applications. | IT equipment & facility,
Mould material, motor material, automatic line, machine & plant etc | Easy to process , good corrosion resistance, high toughness and
processed without distortion after heat-treatable, superior surface
treatment |
Advantages
1. NC full automatic. The production line neither needs workers to
contact any materiel during the production
of from the coil start to roll, until the entire volume of
materials all completed blanking, nor needs any
adjustment, fundamentally completely eradicate the production
safety hidden danger and product quality
problems of the ordinary punch punching.
2. The production line can use roll material directly to product
aluminum wafer and do not need the slitting and
crosscutting processing of roll material, thus reduce production
processes, production costs, and the
possibility of damage the surface of roll material, and the
produced aluminum wafer can be ensured no oil and
no scratches.
3. The production line make full use of the width of the roll
material, using high precision servo motor drive
control system and make the distance of wafer to the edge of
material and the spacing of wafer is reduced to
minimum, fundamentally reduce the amount of waste material, so that
the utilization rate of raw materials
reached more than 80%.
4. The production speed can reach 40-50 pieces per minute and
improve the production efficiency.
5. Due to use the mould design of modular, when convert the
production specifications of wafer, the
conversion time can be reduced to less than 15 minutes. The
diameter range of the wafer can be produced is
85mm to 750mm.
6. Present uncoiling system, six type leveling machine, high rigid
mechanical press, automatic palletizing
system and so on, to ensure the high quality of wafer products.
